oxymetholone 50mg ml Product Detail
Oxymetholone, commonly known as Anadrol due to the first manufactured name of the steroid is derived from Dihydrotestosterone (DHT) and is a 17-Alpha-Alkylated steroid (17-aa.) The 17-aa alteration simply means the steroid has been chemically altered at the 17th carbon position to allow it to survive ingestion by surviving the first pass through the liver; without the 17-aa alteration the steroid would be destroyed before it ever entered the blood stream. The good news is by this alteration we are able to absorb a usable and powerful anabolic steroid; the bad news is this is toxic to the liver. As most oral steroids are 17-aa the toxic effect can be quite high but as it pertains to Anadrol this effect is more pronounced making it one of the most liver toxic steroids on the market.
Once oxymetholone enters the body, which is allowed by its 17-aa form it will become active very quickly and the effects will be dramatically fast. As we understand anabolic androgenic steroids the half-life associated with them largely affects the initial potency; Oxymetholone has a very short half-life of approximately 8.5 hours making the steroids activity almost instant but with a very short active duration. For this reason many athletes will split their Oxymetholone dose into two doses per day in order to keep a peak amount of the steroid active in their system around the clock during periods of use. However, one dose per day will be enough to keep an active amount of the steroid functioning in the body, although not at peak levels.
Anadrol / Oxymetholone Stacking.
Anadrol stacking with other anabolic steroids gives dramatic improvements. For exmaple, adding Anadrol to 50 mg/day of Dianabol gives little added benefit to a steroid cycle; in contrast, adding Anadrol to 50-100 mg/day trenbolone acetate or 60-80 mg/day Anavar (oxandrolone) gives dramatic improvement. In this its stacking behavior is similar to that of Dianabol, but not to that of trenbolone. Likely this is because unlike trenbolone, oxymetholone does not bind strongly to the androgen receptor, and most of its anabolic effect is likely not genomically mediated via the AR.
Oxymetholone / Anadrol For Cutting.
It’s easy to see why Oxymetholone is perfect for bulking as its attributes lend to this end and because of these very attributes very few individuals will use Anadrol during a cutting cycle. However, there is an exception and quite a large one in competitive bodybuilding. Many competitive bodybuilders will supplement with Anadrol the last few weeks before a show; by building up a large amount of the steroid in their body over a period of weeks they are able to make greater use of their carb up at the end. Through this process the competitor will possess a much fuller look but again, caution must be applied. An individual who is very sensitive to water retention from this steroid will need to stay away from this process but if ones diet is on point and such sensitivity is not a problem, coupled with a good AI and solid contest cycle a nice full effect can be gained.
Benefits of Oxymetholone Anadrol.
As a steroid designed to treat weight deficiency and muscle wasting disease this is one of the more prominent bulking steroids we can use for a bulking purpose. While many anabolic steroids can serve both bulking and cutting purposes most have a primary role and Anadrol makes no exception. There is one purpose for Anadrol while on a cutting cycle and we will touch on it as we go but for the majority of steroid users bulking and only bulking will be the only time they use this steroid.
With its immense power, Anadrol is one of the most powerful oral steroids ever made, individuals can see their weight increase by as much as 20-30lbs in a mere few weeks of use as well as see their strength shoot through the roof. Further, as this steroid is almost always used as part of a stack and not alone, due to its low androgen binding characteristics it will allow other steroids you are taking to more aptly fill this role and more or less create a higher level of synergy between the various anabolic androgenic steroids you are taking.
Oxymetholone / Anadrol Cycles & Doses.
Oxymetholone almost always comes in anadrol 50 mg tablets and the most common dose is simply 50 mg per day. While 50 mg per day will prove to be very effective 100 mg per day is not uncommon; however, 100 mg per day will prove to be the most anyone would ever want to take if they desire to remain in a responsible realm. It should be noted that Anadrol does not carry the same risk to reward ratio most other anabolic steroids do. This risk to reward ratio revolves around the dose and benefits of a particular steroid; meaning, the more you take the greater the results but the more you take the greater the risk of potential side-effects. Anadrol has been shown to really taper down in-terms of benefits once doses start going much past 100 mg per day and this negative reaction can start to occur at doses over only 50 mg per day in some individuals. What this means is an extremely high dose of Anadrol will typically not yield better results than a lower more optimal dose; the only effect will be a higher level of liver damage.
oxymetholone 50mg ml Recipe
Anadrol 5g for 100ml @ 50mg/ml
5 grams Anadrol powder
42ml PEG 300
52.5ml 190 Proof Grain Alcohol
oxymetholone 50mg ml Heat Sterilization
The simplest method to clear a steroid solution of microorganisms is to heat sterilize it. The typical way to accomplish this is to place the steroid vial in an oven for 30 minutes (bake at 120°C/250°F). You should leave a needle sticking through the rubber top to equalize the pressure inside the vial, or it may break. Note that a higher temperature and duration are typically used for complete dry heat sterilization, but this is not practical for our purposes due to the potential degradation of vial components, and possibly even the drug components. Still, the recommended 30 minutes at 120°C/250°F should kill most bacteria, and can be regarded as a viable harm reduction strategy.
Some people prefer to use the top of the stove for heat sterilization, and submerge their anabolic steroid vials in a pot of boiling water (100°C/212°F). The vial is kept in the boiling water for approximately 20-30 minutes. While this temperature is sufficient for killing many forms of bacteria and other microorganisms, it is generally not considered the best method of sterilization. A higher temperature should be used. It can also be difficult to control the temperature if the vial rests on the bottom of the pot, which is in direct contact with the burner or heat source. Given these problems, it is preferred to attempt heat sterilization in an oven, as discussed above.
Note that trenbolone appears to break down at fairly low heating temperatures.374 Its degradation increases with temperature and duration. Some degradation may be notable even at 100°C/212°F. As such, trenbolone products should be heat sterilized under slightly different conditions than those recommended above. This typically involves baking the vial in an oven for two hours at 80°C/175°F. Again, an unattached needle should be placed in the rubber stopper to equalize pressure.
oxymetholone 50mg ml Syringe Filtration
Another way to attempt sterilization of a steroid solution is to use a filter. A filter is a device that uses a membrane with tiny holes to prevent particles from passing through. The smaller the holes are, the more effective the filter. For this method a disposable syringe filter is used. These are usually found in .45-micron and .22-micron micropour sizes. The .22-micron filter is preferred, as it allows for the removal of almost all forms of bacteria. A .45-micron filter is also acceptable, though more likely to pass certain strains of diminutive bacteria. Syringe filters can be ordered through many mail-order suppliers, which can be located through online search engines without much difficulty.
The procedure for using a syringe filter is fairly simple. First, make sure you have all of the necessary equipment: a syringe, two needles (minimum), a sterile syringe filter, and a new sealed sterile vial. If you are attempting to sterilize a standard 10 ml vial, it may be preferable to use a syringe large enough to draw the full solution. This will reduce the exposure of your product to air. If drawing more than 3 mL at a time, you will want an extra needle to use for equalizing the pressure (you should leave it in the rubber while drawing from the vial). Be careful not to touch critical surfaces (the exposed needle, rubber stopper) while filtering.
Begin by drawing the steroid solution into the syringe. When you are done, remove the needle and attach your newly unwrapped syringe filter. Attach a new needle to the end of the filter, and inject the solution into the new sterile vial. The sterile vial and new needle are very important, as using the original components would only expose the product to bacteria again. Use enough pressure to empty the syringe into the vial. Be careful, as too much pressure can break the bindings or filter. The process is slow, especially with a larger syringe or small .22-micron filter. Provided great care was taken not to contaminate the steroid during the process, the resulting solution should be free of bacteria.
Also, these sterilization methods are applicable to oil-based steroids only. Heat sterilization (as outlined here) tends to cause the rapid evaporation of solvents/antimicrobial agents in water-based steroids. The suspended (instead of dissolved) nature of the particles also makes them likely to jam a syringe filter. Previous testing suggests there is a high prevalence of bacteria in counterfeit and underground water-based steroids.375 Given this, it is generally advised to only use water-based steroids if they have been dispensed through legitimate supply channels.
oxymetholone 50mg ml Order Process
1. email or whatsapp us about what you need,quantity and destination.
2. we would answer your email in 12 hours with our best price.
3. If you think the price is workable, we would send you our payment information.
4. After we received your payment ,we would arrange the shipping for you
5. You would receive our package in 7-10 working days.
oxymetholone 50mg ml Our Advantage
1. Top Quality in the market, most product have the purity of 98%+ and some beyond 99%
2. Competitive price, we offer speical discount for large amount order.
3. Fast shipping ,we would deliver your product in 7-10 working days.
4. Free Re-shipping, we promise that you will receive your package
5. Security, we will not transfer any of your info to any third party.